Application Notes / AngleLock / Structural Frame Design with AngleLock

Design Guide

Structural Frame Design with AngleLock

Designing an AngleLock frame means picking the profile size, laying out the connections, and checking deflection against your accuracy limit.

Bravo Automation Technologies is an authorized distributor of AngleLock structural aluminum framing and serves customers in the Upper Midwest (North Dakota, South Dakota, Iowa, Missouri, Illinois, Minnesota, Indiana, Wisconsin and Michigan). Browse the AngleLock product page.

AL-AN-002AngleLock EngineeringJune 2024

Overview

The rest of this note walks each step, from first requirements to the final check.

Profile Selection

AngleLock profiles are available in multiple cross-section sizes. Select based on the load-bearing requirements:

  • 30×30mm: Light-duty frames, guards, and enclosures (up to 50 kg/m)
  • 40×40mm: General-purpose machine frames (up to 150 kg/m)
  • 45×45mm: Medium-duty frames and workstations (up to 250 kg/m)
  • 60×60mm: Heavy-duty structures and bases (up to 500 kg/m)
  • 80×80mm: High-load machine bases and gantries (up to 1000 kg/m)

Connection Layout Planning

Plan connections at every joint where members meet. AngleLock connections work at 90-degree intersections (butt joints, corner joints, and T-joints). For angled connections, use the adjustable angle connectors. Minimize cantilever lengths by adding support members where loads are applied. For tall structures, add lateral bracing to prevent sway.

Deflection Verification

Calculate beam deflection to ensure the frame meets accuracy requirements. For a simply supported beam with center load: δ = FL³/(48EI), where F is the load, L is the span, E is the elastic modulus (70 GPa for aluminum), and I is the moment of inertia from the profile datasheet. Keep deflection under L/1000 for general machine frames or L/5000 for precision applications.

Example: 40×40mm profile (I = 8.64 cm⁴) with 1000mm span and 500N center load: δ = 500 × 1000³ / (48 × 70000 × 86400) = 1.72mm. For L/1000 = 1.0mm requirement, upgrade to 45×45mm or add center support.

Typical applications

  • Machine frame design
  • Equipment enclosures
  • Safety guarding
  • Conveyor support structures

Related products

All AngleLock profiles and connectors. See them on the AngleLock page or ask us for a quote.

View the original resource

Tell us what you are building

We will help you pick the right AngleLock part and quote it.