Overview
PBA Systems voice coils show up everywhere from hard disk drive head positioning to active vibration isolation. Construction is just a coil and a magnet, and force tracks current linearly, so they're easy to control for precision force work and short-stroke moves.
Voice Coil Operating Principles
A voice coil runs on the Lorentz force: push current through a coil sitting in a magnetic field and you get a force proportional to that current. The relationship is linear (F = BLI, where B is flux density, L is wire length, and I is current), which is what makes voice coils easy to control:
- Force is exactly proportional to current (no cogging or detent)
- Bi-directional operation by reversing current polarity
- Stroke range: typically 1mm to 50mm
- Force range: millinewtons to hundreds of Newtons
- Bandwidth: DC to several kHz (limited by moving mass)
Driver and Control Requirements
Drive a voice coil with a linear current amplifier (servo drive) that handles four-quadrant operation. For force control, run it in current (torque) mode with a simple proportional controller. For position control, add an encoder or LVDT and close a PID position loop around it. Copley Controls servo drives work well here.
Mechanical Integration
A voice coil only makes axial force. It gives you no lateral guidance, so a separate bearing system (flexures, air bearings, or linear guides) has to hold every other degree of freedom. For short-stroke precision, flexures are the usual pick since they add no friction or hysteresis. Just keep the bearing stiffness below what the voice coil can push against.
Typical applications
- Active vibration isolation
- Precision focus mechanisms
- Force-controlled testing
- Nano-positioning stages
Related products
VCA Series • VCM Series. See them on the PBA Systems page or ask us for a quote.