Overview
Where a conventional spline slides, this one runs on recirculating balls: low friction, zero backlash, long life. Sizing it comes down to matching load capacity, stroke, and torque to the right model.
Load Capacity Calculations
Start with the loads on the spline. You need the radial load (perpendicular to the shaft), the moment load (torque about the shaft), and any combined loading:
- Basic dynamic load rating (C) for continuous motion applications
- Basic static load rating (Co) for stationary or slow-speed loads
- Calculate equivalent load: Pe = Fr + 0.5 × Mt/dp (radial + moment)
- Service life: L = (C/Pe)³ × 50 km (basic rating life)
- Apply service factor for shock, vibration, and environmental conditions
Spline Shaft and Nut Selection
NB ball spline shafts run from 6mm to 50mm diameter. Size the shaft from your load numbers, then pick the nut to suit the mounting: flange, block, or cylindrical. High-torque jobs want more ball circuits (3 or 6) for the extra torque capacity.
Installation Considerations
Alignment between the shaft and its mating parts drives ball spline performance. Get it wrong and the balls load unevenly, which cuts life and adds friction. Mount to precision ground surfaces and check alignment with a dial indicator as you install. Grease it with the specified lubricant before the first run.
Typical applications
- Robotic tool changers
- Pick-and-place with rotation
- Screw driving systems
- Vertical transfer with rotation
Related products
SSP Series • SBS Series • SSS Series. See them on the NB Corp page or ask us for a quote.