Overview
The intervals, lubricants, and inspection steps below apply across the NB linear bearing lines.
Lubrication Schedules
How often you re-lubricate depends on the operating conditions. As a baseline:
- Standard conditions: Re-lubricate every 100 km of travel or 6 months
- High-speed applications (>1 m/s): Every 50 km or 3 months
- Dusty/contaminated environments: Every 25 km or monthly
- Cleanroom applications: Use specified low-outgassing grease, 200 km intervals
- Vertical applications: More frequent due to gravity drainage
Recommended Lubricants
For most jobs NB recommends a lithium-based grease (NLGI Grade 2). It needs decent rust prevention and has to be compatible with the seal material. High-speed work runs better on a lower-viscosity oil. Don't mix grease types: incompatible greases can stop lubricating altogether.
Inspection and Replacement Criteria
At each scheduled service, check the bearings for odd noise, added friction, visible corrosion, or excess play. Measure running parallelism now and then to track wear. Replace a bearing when the noise climbs, when positioning accuracy drops below what the application needs, or when you see surface damage like pitting or flaking on the raceways.
Typical applications
- Preventive maintenance programs
- Machine tool maintenance
- Automated production equipment
- Cleanroom equipment service
Related products
All NB linear motion products. See them on the NB Corp page or ask us for a quote.