Application Notes / NB Corp / Linear Guide Rail Systems: Specifications and Selection

Product Selection

Linear Guide Rail Systems: Specifications and Selection

NB linear guides run on recirculating balls or rollers, so the motion stays smooth and rigid.

Bravo Automation Technologies is an authorized distributor of NB Corp linear bearings and ball splines and serves customers in the Upper Midwest (North Dakota, South Dakota, Iowa, Missouri, Illinois, Minnesota, Indiana, Wisconsin and Michigan). Browse the NB Corp product page.

NB-AN-002NB Corporation EngineeringApril 2024

Overview

Sizes go from miniature up to heavy-duty, with accuracy grades from standard (±20µm) down to ultra-precision (±2µm). Sizing one means running the load numbers, picking an accuracy grade, and matching the guide to its environment.

Load Analysis and Rail Sizing

Start with the loads on each carriage block: dead weight, cutting forces, acceleration forces, and moment loads. NB rates its guides for radial, reverse radial, and lateral loading:

  • Radial load capacity (downward, into the rail)
  • Reverse radial capacity (upward, away from the rail)
  • Lateral load capacity (side loads)
  • Moment load capacity (pitch, yaw, and roll)
  • Calculate equivalent load considering all directions

Accuracy Grade Selection

NB linear guides come in several accuracy grades. A higher grade holds tighter running parallelism and less height variation between carriages, which matters when the work is precision. Standard grade covers general automation. Measurement, optics, and semiconductor work need the precision and ultra-precision grades.

Accuracy grades: Standard (H) ±20µm, Precision (P) ±10µm, High Precision (SP) ±5µm, Ultra Precision (UP) ±2µm — measured as height variation over 1m of travel.

Sealing and Environment

For dusty, wet, or corrosive conditions, NB has stainless steel guides plus seals and scrapers. End seals keep contamination out of the ball recirculation path; bottom seals keep debris off the rail surface. Cleanroom work can use the low-particle-generation seals and greases.

Typical applications

  • Machine tool axes
  • Semiconductor handling
  • Metrology and inspection
  • Medical device mechanisms

Related products

SGL Series • SER Series • SEB Series. See them on the NB Corp page or ask us for a quote.

View the original resource

Tell us what you are building

We will help you pick the right NB Corp part and quote it.