Overview
MARCH Robotics picked Copley Accelnet Plus drives for their latest autonomous guided vehicles, the kind that move loads around warehouses and factories. The drive is small, runs EtherCAT, and works across the DC voltage range a battery pack actually sits in, which is what a mobile robot needs when it has to hold velocity accurately without wasting power.
Application Requirements
The MARCH AGV platform needed:
- Dual-wheel differential drive with independent velocity control
- 48VDC battery-powered operation with high efficiency
- EtherCAT connectivity to the onboard Linux-based controller
- Compact drive size to fit within the vehicle chassis
- Safe Torque Off (STO) for safety-rated stopping
Implementation
Two Accelnet Plus BEL drives run the left and right wheel motors in velocity mode over EtherCAT. The onboard navigation controller works out the differential wheel speeds from LIDAR and odometry and sends velocity commands at 1 kHz over Cyclic Synchronous Velocity (CSV) mode. The drives' own current limiting protects the motors when a wheel hits something or stalls.
Results
The drives navigated smoothly, holding velocity to better than 0.1% of the commanded speed. Battery life went up 15% over the previous drives, which came down to the Accelnet Plus power stage running more efficiently. STO gave them safety-rated Category 1 stops whenever the vehicle's safety scanner tripped.
Typical applications
- Autonomous guided vehicles (AGVs)
- Mobile robots
- Battery-powered systems
- Warehouse automation
Related products
Accelnet Plus (BEL, BPL). See them on the Copley Controls page or ask us for a quote.